Search:  


Panasonic PT-DZ13KU / PTDZ13KU Projector - NO LENS INCLUDED


Panasonic PT-DZ13KU / PTDZ13KU Projector - NO LENS INCLUDED



Panasonic PT-DZ13KU / PTDZ13KU Projector - NO LENS INCLUDED

Price: $79,999.00  CALL (800-678-8585) TO ORDER - LOWEST PRICE POSSIBLE!

Panasonic PT-DZ13KU Projector


PRICE INCLUDES DELIVERY
FULL MANUFACTURER WARRANTY

This advertised price is required by Panasonic. All Authorized Dealers use it. Electrified is authorized and proudly sells this brand at the Lowest Possible Price. CALL 800-678-8585 to get your Best Deal!

**A Lens Is Required But Not Included For This Item**

OPTIONAL PROJECTOR ACCESSORIES AVAILABLE

PLEASE CALL FOR PRICING.

STOCK SUBJECT TO AVAILABILITY

PLEASE CALL FOR DETAILS.

SPECS

Power Supply:  120 V, 220-240 V AC, 50/60 Hz
Power Consumption:   
120 V AC:  1,000 W (1,030 VA)
(0.2 W with standby mode set to eco.*1 6 W with standby mode set to normal. Both with fan stopped.)
220-240 V AC:  970-W (1,020 VA)
(0.3 W with standby mode set to eco.*1 9 W with standby mode set to normal. Both with fan stopped.)
Dissipation BTU:  120 V: max. 3,413 BTU/hour (without light output: 3,249 BTU/hour ). 220-240 V: max. 3,311 BTU/hour (without light output: 3,147 BTU/hour)
DLP™ chip (Panel size Display method Pixels):  24.4 mm (0.96 in) diagonal (16:10 aspect ratio)
DLP™ chip x 3, DLP™ projection system
2,304,000 (1,920 x 1,200) x 3,
total of 6,912,000 pixels


Lamp:  380 W UHM lamps (HIGH mode) x 2
Screen size (diagonal):  1.78 -25.4 m (70- 1,000 in),
1.78 -15.24 m (70- 600 in)
with the ET-D75LE8, 16:10 aspect ratio
Brightness :  12,000 lm (dual-lamp). In Portrait mode, maximum brightness becomes 10,600 lm. *1
Center-to-corner uniformity:  90% *1
Contrast :  10,000:1 ( full on/of f, with DYNAMIC IRIS set to "3") *1
Resolution:  1,920 x 1,200 pixels
(Input signals that exceed this resolution will
be converted to 1,920 x 1,200 pixels.)
Scanning frequency SDI:   
Dual-link:  SMPTE ST 372 compliant, [RGB 4:4:4 12-bit/10-bit] 1080/50i, 1080/60i, 1080/25p, 1080/24p,
HD-SDI:  1080/24sF, 1080/30p [X'Y'Z' 4:4:4 12-bit] 2,048 x 1,080/24p, 2,048 x 1,080/24sF
3G-SDI:  SMPTE ST 424 compliant, [RGB 4:4:4 12-bit /10-bit] 1080/50i, 1080/60i, 1080/25p,
1080/24p, 1080/24sF, 1080/30p [YPBPR 4:2:2 10-bit] 1080/50p, 1080/60p,
HD-SDI 2:  SMPTE ST 292 compliant, [YCBCR 4:2:2 10-bit] 720/50p, 720/60p, 1035/60i,
1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
SD-SDI:  SMPTE ST 259 compliant, [YCBCR 4:2:2 10-bit] 480i, 576i
HDMI/DVI-D:  480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p
VGA (640 x 480)-WUXGA* (1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25-162 MHz
*WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking)
RGB:  fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 20-162 MHz
YPBPR (YCBCR):  fH: 15.75 kHz, f V: 60 Hz [480i (525i)] fH: 45.00 kHz, f V: 60 Hz [720 (750)/60p]
fH: 28.13 kHz, f V: 50 Hz [1080 (1125)/50i] fH: 31.50 kHz, f V: 60 Hz [480p (525p)]
fH: 15.63 kHz, f V: 50 Hz [576i (625i)] fH: 37.50 kHz, f V: 50 Hz [720 (750)/50p]
fH: 31.25 kHz, f V: 50 Hz [576p (625p)] fH: 28.13 kHz, f V: 25 Hz [1080/25p]
fH: 33.75 kHz, f V: 60 Hz [1035/60i] fH: 27.00 kHz, f V: 48 Hz [1080/24sF]
fH: 33.75 kHz, f V: 60 Hz [1080 (1125)/60i] fH: 27.00 kHz, f V: 24 Hz [1080/24p]
fH: 33.75 kHz, f V: 30 Hz [1080/30p] fH: 67.50 kHz, f V: 60 Hz [1080/60p]
fH: 56.25 kHz, f V: 50 Hz [1080/50p]
Video/ Y/C:  fH: 15.75 kHz, f V: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, f V: 50 Hz [PAL /PAL-N/SECAM]
Optical Axis:   
Vertical:  ±55 % (±44 % with the ET-D75LE6) from center of screen (powered)
Horizontal:  ±20 % (±15 % with the ET-D75LE6) from center of screen (powered)
Optical axis shift cannot be operated with the ET-D75LE50.
Keystone correction range:  Vertical: ±40°*, horizontal: ±15°. *±22° with the ET-D75LE50, ±28° with the ET-D75LE6.
Keystone correction range with optional Upgrade Kit ET-UK20:  Vertical ±40° and horizontal ±40° with the ET-D75LE1/LE2/LE10/LE20,
vertical ±45° and horizontal ±40° with the ET-D75LE3/LE4/LE30/LE40,
vertical ±22° and horizontal ±15° with the ET-D75LE5/LE50,
vertical ±28° and horizontal ±15° with the ET-D75LE6
Installation:  Ceiling/floor, front /rear, por trait. Requires optional lamp units for portrait mode
Terminals:   
SDI 1 IN:  BNC x 1 (3G/HD/SD-SDI)
SDI 2 IN:  BNC x 1 (HD/SD-SDI)
3D SYNC IN/OUT:  BNC x 1 (3D timing signal )
3D SYNC OUT:  BNC x 1 (3D timing signal )
DVI-D in:  DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
HDMI IN:  HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
RGB 1 IN:  BNC x 5 (RGB/YPBPR/ YCBCR/ YC x 1)
RGB 2 IN:  D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/ YCBCR x 1)
VIDEO In:  BNC x 1 (composite video)
SERIAL IN:  D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
SERIAL OUT:  D-sub 9-pin (male) x 1 for link control
REMOTE 1 N:  M3 x 1 for wired remote control
REMOTE 1 OUT:  M3 x 1 for link control ( for wired remote control )
REMOTE 2 IN:  D-sub 9-pin (female) x 1 for external control (parallel )
LAN:  RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
Cabinet materials:  Molded plastic
Dimensions (W X H X D):  530 x 200* x 548.5 mm (20-7/8 x 7-7/8* x 21-19/32 in) (optional lens not included) *With legs at shortest position.
Weight :  Approximately 24 kg (52.9 lbs) (optional lens not included). Average value. May differ depending on the actual unit.
Operation noise:  45 dB (dual lamp operation with lamp HIGH mode), 43 dB (dual lamp operation with lamp MIDDLE mode),
37 dB (dual lamp operation with lamp ECO mode). *1
Operating Environment:  Operating temperature: 0- 45 °C (32 -113 °F)*.
Operating humidity: 10- 80 % (no condensation).
*Operating temperature range: 0 °C to 40 °C (32 °F to 104 °F)
when the FAN CONTROL is set to HIGH ALTITUDE MODE (for altitudes 1,400 m to 2,70- m (4,593 ft to 8,858 ft) above sea level).
When projector is used with the ET-SFD320 Smoke Cut Filter, operating temperature range: 0 °C to 35 °C (32 °F to 95 °F),
and the projector cannot be used in places at high altitude.
WITH THE ET-LAD320P/LAD320PW MOUNTED FOR THE PORTRAIT MODE: Operating temperature range: 0 °C to 40 °C (32 °F to 104 °F).
Operating temperature range: 0 °C to 35 °C (32 °F to 95 °F) when the FAN CONTROL is set to HIGH ALTITUDE MODE
(for altitudes 1,400 m to 2,70- m (4,593 ft to 8,858 ft) above sea level). When projector is used with the ET-SFD320 Smoke Cut Filter,
the operating temperature range: 0 °C to 30 °C (32 °F to 86 °F), and the projector cannot be used in places at high altitude.
In stock